General Tool MMD950

SKU: GTMMD950 Categories: , Product ID: 4713


General Tool MMD950
  • Two measurement modes: Pin and pinless
  • Pin mode uses replaceable pins at end of 46 in. cable; pinless mode uses integral ball sensor with up to 4 in. measurement depth
  • Displays % WME or relative readings simultaneously on two displays: 0 to 99.9 count jumbo LCD, and 40-dot tri-color LED Bargraph
  • Spare pins storage compartment
  • Auto-calibrating
  • Data hold function
  • Low battery warning
  • User can set beeper sound, auto power off time, backlight function
  • Superior to flat bottom sensors by enabling the user to measure in corners, hard-to-reach areas and narrow spaces
  • Small contact area for improved repeatability
  • Spherical sensor works on uneven surfaces and corners
  • Works at any angle
  • Can accommodate wide viewing angle
  • Keeps hand away from sensing area, reducing interference
  • Measurement Range: 0 to 99.9% WME (Wood Moisture Equivalent) or REL
  • Measurement Accuracy: ±(3% of reading +5 digits)
  • Pin Length/Type: 3/16 in. (4.76mm) stainless steel
  • External Probe Cable Length: 46 in. (1.168m)
  • Spherical Ball Sensor Measurement Depth: 4 in. (101.6mm)
  • Ball Sensor Diameter: 1 in. (25.4mm)
  • LCD Digit Height: 0.9 in. (22.9mm)
  • LCD Resolution: 0.1%
  • LED Bargraph Composition/Colors: 40 dots/green, red, yellow
  • Operating Current: 70 mADC max
  • Operating Temperature: 32° to 122°F (0° to 50°C)
  • Dimensions: 9 x 2.75 x 1.625 in. (229 x 70 x 41mm)
  • Weight: 8 oz. (249g)
  • Power Source: 1 “9V” battery (included)


There are no reviews yet.

Be the first to review “General Tool MMD950”

Your email address will not be published. Required fields are marked *