Injectidry Ceiling and Wall Drying System

Description

Injectidry Ceiling and Wall Drying System

TRAPPED MOISTURE VENTILATING SYSTEMS

CEILING & WALL DRYING PACKAGE

The Ultimate Drying System

Injectidry’s High Pressure drying systems are specifically developed to target high risk areas of hidden moisture such as: walls and ceilings, even those coated with watertight finishes like PVA paint and vinyl wallpaper coverings, double-sheeted fire walls, party walls, sound barriers, insulation, walls behind cabinets and fixtures and floors. The Injectidry ®HP drying system is the only truly “industrial grade” system sold today. The internal blower is a  Regenerative Blower and many operate 20,000 hours or more trouble free. This translates into more than 10 years of continuous operation. It is not a fan that is typically associated with a portable carpet cleaning machine or shop-vac.

SPECS:

Total System Airflow 108 CFM (cubic ft./min.
Static Pressure(maximum) 60 inches (water lift)
AIR Injector Hole 3/16 inch (wall) ¼ inch (cabinet)
Capacity: 134 linear ft. (using 1 injector every 16”)
Power Draw (115 Volts):  5.6 amps – 11 amps(depending on load)
Drying Modes: Negatively or Positivel
Dimensions: 18 x 13 x 16.2 inches (with pipes)
Warranty:  7 YR – Housing, 3 YR – Blower, 1 YR Parts – Limited

HP 60i Comes with:

1 HP60 Unit (Part# INJ01-I)
1 Main AIR Quick Connects Installed (Part# PTFC)
1 Carry Bag (Part# CB1)
1 Rolling Duffle Bag (Part# CB2)
12 Active Hoselines (each having 2 Hosecuffs adn 1QC Hose connector) (Part # AH3)
1 AIR OUT Hose with factory set PRV and Main Quick (Part# AOMH)
1 AIR IN Main Hose with factory set PRV and Main Quick Connect T (Part # AIMH)
10 Quick Connect Manifolds (Part # QCM01)
3 Quick Connect Hose Connectors (Part # QCC01)
2 Quick Connect – Small Ts (Part # QCT01)
10 Hosecuffs (Part # HC3)
4 Endcap Plugs (Part # QCP01)
50 Tubing Connectors (Part # RP1)
170 Wall Injectors (Part # IM06A)
1 Safety Yellow Tubing (3/8 x 200″) (Part # RH05A)
1 Manual and CD