Phoenix Axial Fan

SKU: PH40255200 Categories: , Product ID: 4046


Phoenix Axial Air Mover

The Phoenix Axial Air Mover is the industry’s only air mover specifically engineered with patent pending FOCUS™ Technology. FOCUS Technology revolutionizes evaporative drying by producing air velocities greater than competitive products and focusing those velocities on hard-to-dry areas such as carpet and pad, sub-floor and walls.

The Phoenix Axial Mover operator interface is conveniently located for easy access, featuring: power indicator lamp, three-position switch, hour meter, FCI outlet, and circuit breaker, eliminating nuisance trips to the breaker box.

  • Greater air velocities than competitive products
  • Focused velocities 0 to over 23.5 feet
  • Directs air flow towards problematic corners, where the wall meets the floor
  • Capable of reducing secondary damage claims stemming from the side-effects of trapped humidity like fungi, mold, mildew or structural damage
  • 3000 cfm
  • Long-life 2-speed motor
  • Low noise, quiet operation
  • Lightweight and compact linear low density polyethylene (LLDP) housing is washable, chemical resistant and stacks for storage
  • Colored Restoration Red for high visibility
  • Ergonomic handle
  • Power-on indicator light
  • Automatic hour meter displays site run time
  • On-board power management:
    • Circuit breaker protects air mover and attached devices and prevents nuisance visits to the junction box
    • GFCI protection promotes operator safety in wet applications
    • Duplex AC outlet allows daisy chaining of up to four axial air movers
  • 20 ft AC cord with cord management
  • Units interlock for ease of stacking during storage and handling
  • Weighs 2.5 lbs less than competitive units
Product Specifications:

Part No: 4025200
Drive Motor: 1/4 hp 1-phase 110/120 VAC 2-speed 4-pole, PSC Electric Motor
CFM: Approximately 3000
Cord: 20 ft Power Cord
Outlet: 15A UL Rated GFCI Duplex Receptacle
Current Draw: 2.5 Amps
Voltage: 115 VAC
Warranty: Year One – 100% parts and labor (all components); Year Two – 100% parts only (all components); Year(s) Three through Seven – Only materials and workmanship of the housing are covered

Dimension (Machine):

Width: 19.9″
Height: 19.5″ 20″
Depth: 15.2″ (intake to exhaust)
Weight:     29.5 lbs 32.7 lbs

Dimension (Shipping)

Width: 19.25″
Height: 20″
Depth: 15.5″ (intake to exhaust)
Weight: 32.7 lbs


There are no reviews yet.

Be the first to review “Phoenix Axial Fan”

Your email address will not be published. Required fields are marked *